Please use this identifier to cite or link to this item: https://dspace.upt.ro/xmlui/handle/123456789/7826
Title: Real-time implementation of a single-phase asynchronous motor drive feeding within an open energy source [articol]
Authors: Ebrahim, Essamudin A.
Sweelm, Emad
Subjects: DC-modified nanogrids (DC-MnG)
Open Energy Source (OES)
Real-time simulator (RTS)
Single-phase asynchronous motor (SPAM)
Switched Boost Inverter (SBI)
Z-Source Inverter (ZSI)
Issue Date: 2022
Publisher: Timișoara : Editura Politehnica
Citation: Ebrahim, Essamudin A.; Sweelm, Emad. Real-time implementation of a single-phase asynchronous motor drive feeding within an open energy source. Timişoara: Editura Politehnica, 2022.
Series/Report no.: Journal of Electrical Engineering;Vol 22 No 1
Abstract: A modified nanogrid (MnG) is a very small scalable grid with a low power single-input multi-output (SIMO) inverter. This inverter simultaneously produces both AC and DC currents, such as the switched boost inverter (SBI) and the z-source inverter. These inverters are suitable for low-power loads such as home appliances that use fractional horse-power motors as single-phase asynchronous drives. Thus, this article proposes a single-phase induction motor powered from a modified nanogrid that involves multiple types of inverters such as a SBI and a ZS inverter. The modified nanogrid is mainly dependent on photovoltaic (PV) as a renewable resource. Thus, this manuscript involves a full design for this proposed grid with its maximum power point tracking (MPPT) and the mathematical models for motor drive with both a SBI and a ZSI. Time-varying speed trajectories are proposed to test the robustness of the proposed drives relative to the fluctuation of PV-parameters like its irradiance. Test results are obtained using the Matlab/ Simulink software package and a comparison with the traditional sinusoidal pulse width modulation (SPWM) inverter as a single-input single-output inverter (SISOI). The results indicate that the proposed single-input multi-output inverters are suitable for driving these motors through start-up and operation, although the DC-link voltage is minimized. Furthermore, the proposed system is experimentally implemented with OPAL RT-4510v real-time hardware in the loop (HIL), rapid control prototyping, OP-8660 HIL controller and data acquisition platform.
URI: https://dspace.upt.ro/xmlui/handle/123456789/7826
ISSN: 1582-4594
Appears in Collections:Articole științifice/Scientific articles

Files in This Item:
File Description SizeFormat 
BUPT_ART_Ebrahim_f.pdf1.86 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.