Please use this identifier to cite or link to this item: https://dspace.upt.ro/xmlui/handle/123456789/7030
Title: Optimization for Augmentation of Primary Power supply to Improve the Endurance of the Quadcopter [articol]
Authors: Balraj, Siranthini
Ganesan, Anitha
Subjects: BLDC generator
Quadcopter
Energy Harvester
Hysteresis controller
SEPIC converter
Lipo battery
Issue Date: 2019
Publisher: Timișoara : Editura Politehnica
Citation: Balraj,Siranthini; Ganesan, Anitha. Optimization for Augmentation of Primary Power supply to Improve the Endurance of the Quadcopter. Timişoara: Editura Politehnica, 2019.
Series/Report no.: Journal of Electrical Engineering;Vol 19 No 3
Abstract: The flight endurance is the major challenge in Quadcopter or Quadrotor or Drone applications. This paper presents the rotary power harvesting system using Permanent Magnet Brushless DC Generator (BLDCG) to harvest the electrical energy from the rotors of Quadcopter to extend its flight duration. The Energy Harvesting (EH) system is mounted rigidly to the propeller shafts of Quadcopter. This work mainly focuses on the optimization technique to maximize the power generated from BLDCG using controlled rectifiers and to compare the results with the state of the art. To detect the position of the rotor, Sensorless back emf detection technique is adopted. Literature survey reveals that the conventional uncontrolled rectification methods using diodes, have its own limitations which may not maximize the possible power due to non-optimal current and low power per ampere ratio. Moreover, Diode rectifiers generates harmonics to the source side and also permits only one side power flow. This problem is solved using Controlled rectifiers with MOSFET. A Hysteresis comparator along with the PI controller is used to regulate the DC link voltage. Followed by the Energy Harvesting system, the Generated output voltage is boosted and regulated using Single Ended Primary Inductor Converter (SEPIC) to power and charge the Quadcopter on board Lipo Battery. This proposed optimized harvesting system is simulated using MATLAB simulation and a complete hardware setup is built and tested in the laboratory.
URI: https://dspace.upt.ro/xmlui/handle/123456789/7030
ISSN: 1582-4594
Appears in Collections:Articole științifice/Scientific articles

Files in This Item:
File Description SizeFormat 
BUPT_ART_Balraj_f.pdf1.45 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.