Abstract:
The flight endurance is the major challenge in Quadcopter or Quadrotor or Drone applications. This paper presents the rotary power
harvesting system using Permanent Magnet Brushless DC Generator (BLDCG) to harvest the electrical energy from the rotors of
Quadcopter to extend its flight duration. The Energy Harvesting (EH) system is mounted rigidly to the propeller shafts of
Quadcopter. This work mainly focuses on the optimization technique to maximize the power generated from BLDCG using
controlled rectifiers and to compare the results with the state of the art. To detect the position of the rotor, Sensorless back emf
detection technique is adopted. Literature survey reveals that the conventional uncontrolled rectification methods using diodes, have
its own limitations which may not maximize the possible power due to non-optimal current and low power per ampere ratio.
Moreover, Diode rectifiers generates harmonics to the source side and also permits only one side power flow. This problem is solved
using Controlled rectifiers with MOSFET. A Hysteresis comparator along with the PI controller is used to regulate the DC link
voltage. Followed by the Energy Harvesting system, the Generated output voltage is boosted and regulated using Single Ended
Primary Inductor Converter (SEPIC) to power and charge the Quadcopter on board Lipo Battery. This proposed optimized
harvesting system is simulated using MATLAB simulation and a complete hardware setup is built and tested in the laboratory.